Certified to
NSF/ANSI/CAN 61
NSF/ANSI/CAN 372
IP54
IP55 with Weather Cover
Compatible with the following typical concentration of regenerants or chemicals
Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chlorine and chloramines
Made in The USA
Models & features
Specification sheet
WS1.5PCI Specification sheetFeatures and Benefits
- 1.5″ top mount control valve suited for mid-size commercial/industrial applications
- Glass filled composite
- Economical plastic optional meter assembly
- Service flow rate of 227 lpm (13.6 m3/h) (60 gpm), backwash 163 lpm (9.8 m3/h) (43 gpm)
- Upflow/downflow brining field convertible
- Solid state microprocessor with easy access front panel settings
- Front panel display for time of day, days until next regeneration, volume remaining and current flow rate
- Four methods to initiate a regeneration; meter immediate, meter delayed, time clock delayed or
pressure differential - Program in ppm, French degrees, German degrees, or cubic meters
- Fully programmable regeneration cycle sequence (maximum 9)
- Programmable regeneration cycle times
- Days override feature; 1-28 days available
- Level VI 15-volt output DC power supply provides safe and easy installation
- Pre or Post treated water regenerant refill
- Low salt alarm
- Coin cell lithium battery backup for time of day up to 24 hours
- One piece expanding seal spacer stack assembly
- Linearly reciprocating piston operation
- Reliable and proven DC drive
Specification sheet
WS1.5PEE Specification sheetFeatures and Benefits
- 1.5″ top mount control valve suited for mid-size commercial/industrial applications
- Glass filled composite
- Economical plastic optional meter assembly
- Service flow rate of 60 gpm, backwash 43 gpm
- Upflow/downflow brining field convertible
- Solid state microprocessor with easy access front panel settings
- Front panel display for time of day, days until next regeneration, volume remaining, current flow rate and total volume used (Totalizer)
- Four methods to initiate regeneration; meter immediate, meter delayed, time clock delayed or pressure differential
- Optional double backwash feature offers optimum regeneration, cleaning ability and efficiency
- Fully adjustable cycle times with 6-cycle control delivers controlled backwash, downflow brining or upflow brining, slow rinse, second backwash, fast rinse, refill and downflow service
- Coin cell lithium battery backup for time of day up to 8 hours
- Level VI 15-volt output DC power supply provides safe and easy installation
- Post treated water regenerant refill
- Days override feature; 1 – 28 days available
- One piece expanding seal spacer stack assembly
- Linearly reciprocating piston operation
- Reliable and proven DC drive
Specification sheet
WS1.5PEI Specification sheetFeatures and Benefits
- 1.5″ top mount control valve suited for mid-size commercial/industrial applications
- Glass filled composite
- Economical plastic optional meter assembly
- Service flow rate of 227 lpm (13.6 m3/h) (60 gpm), backwash 163 lpm (9.8 m3/h) (43 gpm)
- Solid state microprocessor with easy access front panel settings
- Upflow/downflow brining field convertible
- Front panel display for time of day, days until next regeneration, volume remaining, current flow rate and total volume used (Totalizer)
- Four methods to initiate regeneration; meter immediate, meter delayed, time clock delayed or
pressure differential - Optional double backwash feature offers optimum regeneration, cleaning ability and efficiency
- Fully adjustable cycle times with 6-cycle control delivers controlled backwash, downflow brining or upflow brining, slow rinse, second backwash, fast rinse, refill and downflow service
- Coin cell lithium battery backup for time of day up to 8 hours
- Level VI 15-volt output DC power supply provides safe and easy installation
- Post treated water regenerant refill
- 24 hour clock
- Days override feature; 1 – 28 days available
- One piece expanding seal spacer stack assembly
- Linearly reciprocating piston operation
- Reliable and proven DC drive
Specifications
| General | |
| Inlet/Outlet Fitting Connections | 1.5” Male NPT |
| Cycles | up to 6 |
| Valve Material | Glass filled composite |
| Regeneration | 20 - 125 psi |
| Operating Pressures | 40° - 110° F |
| Operating Temperatures | Backwash Filter, Weather Cover |
| Options |
| FLow rates | |
|
Service @15 psi drop includes meter |
60 gpm |
|
Backwash @25 psi drop includes bypass |
43 gpm |
| Cv Service | |
| Cv Backwash |
| Tank applications | |
| Water Softener | 12” – 24” diameter |
| Water Filter | 12” – 24” diameter |
| Meter |
| Accuracy |
| Flow Rate Range |
| Gallon Range |
| Totalizer |
| Dimensions & Weight | |
| Distributor Pilot Valve bodies with 1.5" Female NPT Inlet & Outlet | 1.90” OD (1.5" NPS) |
| Drain Line | 1” Male NPT Elbow |
|
Brine Line |
½” OD Poly Tube Compression |
| Mounting Base | 4” - 8 UN |
| Height From Top Of Tank | 10.75” |
| Weight | 9 lbs. |
| Cycles of Operation Minutes |
WS1.5PEE | WS1.5PSD | WS1.5PSP |
| Backwash 1st (upflow) | 1-95
Softener 1-95 Filter | ? | ? |
| Regenerate Draw/Slow Rinse (downflow) | 1-180 | ? | ? |
| Backwash 2nd (upflow) | 1-95 | ? | ? |
| Fast Rinse (downflow) | 1-95
Softener 1-95 Filter | ? | ? |
| Regenerant Refill in service with treated water |
0.1-99.0 or off | ? | ? |
| Service (downflow) | |||
| Hold (service) |
| Electrical Specifications All models excluding WS1.25SD |
US Power Supply | International Power Supply |
| Supply Voltage | 100VAC to 120VAC | 200VAC to 240VAC |
| Supply Frequency | 50/60 Hz | 50/60 Hz |
| Output Voltage | 15VDC | 15VDC |
| Output Current | 500 mA | 500 mA |
| Battery Specifications |
| Battery |
| Charging |