Certified to
Tested and Certified by NSF International against NSF/ANSI Standard 58 for the reduction of: Arsenic (Pentavalent), Barium, Cadmium, Chromium (Hexavalent), Chromium (Trivalent), Copper, Fluoride, Lead, Nitrate, Nitrite, Radium 226/228, Selenium and TDS.
If you have a Microline RO System and need parts or service, please visit our Service Center website.
Made in The USA
Features
- Delicious, sparkling-clear drinking water
- Convenience: Fresh, clean water ready at your faucet
- Pristine, flavorful coffee, tea and juice
- Quality water for your aquarium
- Cleanly rinsed fresh fruits and vegetables
- Crystalline, harder and clearer ice cubes
- Prolong the life of your humidifier or steam iron
- Spotless glassware when rinsed with R.O. water
- Cost effective: No more bottled water costs
- Better tasting soups, sauces and meals
- Environmentally sound: No chemicals
- Great for your pets
Clack manufactures an extensive line of drinking water products including Microline® drinking water systems. Microline drinking water systems utilize a patented manifold design. Microline systems are available as reverse osmosis units or multiple stage filtration systems which use ceramic elements and other filter technologies.
Three High Performance Filtration Stages:
- The Sediment/Carbon Prefilter protects the automatic shut–off and Membrane from clogging with debris, and is also designed to reduce chlorine, to protect the refined T.F.C. Membrane.
- Reverse Osmosis. This is the heart of the system. The T.F.C. Membrane substantially reduces dissolved solids and other unwanted impurities (specified on the performance data sheet) from the water stream.
- The R.O. water is then routed to an Activated Carbon Filter, where the water flows through the filter very slowly to achieve prolonged contact with this specialized carbon.
- The final stage of filtration, an Inline Carbon Filter, is designed to reduce any remaining tastes and odors before the water reaches your glass, adding a final “polish” to your filtered water.
State-Of-The-Art Features:
- Patented Design: Exclusive manifold plate with patented channel design reduces tubing connections and simplifies installation.
- High Capacity Tank: Holds approximately 2 gallons of water without taking up a lot of space.
- Compact System: Space-saving design is ideal for undersink installations and uses a minimum of space.
- Automatic Shut-Off: Signals the system to stop making water until more is needed.
- Maximum Production: High performance T.F.C. Membrane with a rating of 50 gallons per day, (189 liters per day).
- Optional Water Quality Monitor: An optional Water Quality Monitor allows you to ensure your system is working by simply pushing a button.
Specifications
| Primary Assembly Components | |
| Prefilter | Sediment/Carbon Filter |
| Membrane | Thin Film Composite (T.F.C.) |
| Post Filter |
| Performance Specifications | |
| Membrane Production* Membrane Rating | 41-53 gallons per day (155-201 lpd) |
| Membrane T.D.S. Reduction* Membrane Rating | 96% minimum |
| System Production** System Rating | produces 11 gpd (41 lpd) |
| System Average T.D.S. Reduction** System Rating | 94% |
| Incoming Water Specifications | |
| Water Pressure | 40–100 psig (280–690 kPa) |
| Total Dissolved Solids (T.D.S.) | 2000 ppm (mg/l) maximum |
| Water Temperature | 40–100°F (4–38°C) |
| pH | 4–11 (optimum rejection at pH 7.0 - 7.5) |
| Hardness | less than 10 gpg (170 mg/l) or soften |
| Iron | less than 0.1 ppm (mg/l) |
| Manganese | less than 0.05 ppm (mg/l) |
| Hydrogen Sulfide | |
| Chlorine*** | see note below |
| Bacteria**** | water source must be potable |
* Measured at industry standard condition of 65 psig (448 kPa), 77°F (25°C), 250 ppm (mg/l) T.D.S., and discharging to atmosphere.
** Actual capacity measured at 50 psig (345 kPa), 77°± 2° F (24°- 26° C), and 750 ± 40 ppm (mg/l) TDS per section 6 of NSF/ANSI Standard 58 product water to pressurized storage tank.
*** 3 Chlorine will damage a T.F.C. Membrane. The Sediment/Carbon Prefilter Cartridge is designed to reduce chlorine from the incoming water. Change cartridge every 6 to 12 months, more often if the water contains more than 1 ppm chlorine.
**** Do not use with water that is microbiologically unsafe or of unknown quality, without adequate disinfection before or after the system.
** Actual capacity measured at 50 psig (345 kPa), 77°± 2° F (24°- 26° C), and 750 ± 40 ppm (mg/l) TDS per section 6 of NSF/ANSI Standard 58 product water to pressurized storage tank.
*** 3 Chlorine will damage a T.F.C. Membrane. The Sediment/Carbon Prefilter Cartridge is designed to reduce chlorine from the incoming water. Change cartridge every 6 to 12 months, more often if the water contains more than 1 ppm chlorine.
**** Do not use with water that is microbiologically unsafe or of unknown quality, without adequate disinfection before or after the system.